Directory   Messages   Segments   Composites   Data elements   Codes Meaning of the change indicators
  UN/EDIFACT  D.01A (Batch) Syntax version 3 Issue date 2000-11-05  
  Message type specification COEDOR
 
 
COEDOR 8 Container stock report message  
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
 
0010    UNH
Message header
A service segment starting and uniquely identifying a message. The message type code for the Container stock report message is COEDOR.

Note: Container stock report messages conforming to this document must contain the following data in segment UNH, composite S009:

Data element  0065 COEDOR
              0052 D
              0054 01A
              0051 UN
M 1
0020    BGM
Beginning of message
A segment to indicate the beginning of a message and to transmit the identifying number.
M 1
0030    DTM
Date/time/period
A segment to indicate the date and time on which the particular container has been ascertained as being in stock (stock check date/time).
M 1
0040    FTX
Free text
A segment to specify free form or processable supplementary information, such as:
-   change information
C 9
0050    SG1
RFF-DTM
A group of segments to specify a reference relating to the whole message, and its date and/or time.
C 9
0060    RFF
Reference
A segment to express a reference which applies to the entire message, such as:
-   reference to previous message
M 1
0070    DTM
Date/time/period
A segment to indicate date and/or time related to the reference.
C 9
0080    SG2
NAD-SG3
A group of segments to identify a party and/or addresses and related contacts.
M 9
0090    NAD
Name and address
A segment to identify the party's name and address, and function, such as:
-   message recipient
-   message sender
-   ordering customer
-   ordering customer agent
M 1
0100    SG3
CTA-COM
A group of segments to identify a contact and its communications related to the party.
C 9
0110    CTA
Contact information
A segment to identify a person or department of a message sender and/or message recipient, such as:
-   information contact
M 1
0120    COM
Communication contact
A segment to identify a communication number of a person or department to whom communication should be directed.
C 9
0130    SG4
EQD-RFF-DTM-LOC-COD-HAN-EQN-SG5-SG6-SG8-SG10
A group of segments to specify containers in stock of the sending party, including relevant details by individual container number or grouped and total by type and size.
M 9999
0140    EQD
Equipment details
A segment to specify the prefix and number of the container, its status and a full/empty indication.
M 1
0150    RFF
Reference
A segment to express a reference which applies to the particular container, such as:
-   container announcement reference number
-   acceptance order reference
C 9
0160    DTM
Date/time/period
A segment to indicate the date and time on which the particular container has been ascertained as being in stock (stock check date/time), and to indicate when the container has been delivered at the stock keeper (actual equipment positioning date/time).
C 9
0170    LOC
Place/location identification
A segment to indicate a port/place according to the corresponding container, such as:
-   stack position
C 9
0180    COD
Component details
A segment to specify the details of the components of transport equipment.
C 1
0190    HAN
Handling instructions
A segment to specify handling instructions related to the container equipment.
C 9
0200    EQN
Number of units
To specify the number of units of a particular type and size of equipment.
C 1
0210    SG5
DAM-COD
A group of segments to specify damage details related to the equipment.
C 9
0220    DAM
Damage
A segment to specify equipment damages, such as the point of the damage on the equipment, and the type of damage.
M 1
0230    COD
Component details
A segment to specify component details of the damaged equipment.
C 1
0240    SG6
TDT-SG7
A group of segments to specify transport details related to the container.
C 1
0250    TDT
Details of transport
A segment to indicate information about sea transport related to the container (main carriage transport), such as voyage number/indication sea transport, vessel and carrier/liner service.
M 1
0260    SG7
LOC-DTM
A group of segments to specify locations related to the main carriage of the container equipment.
C 9
0270    LOC
Place/location identification
A segment to specify a location related to the main carriage of the container such as port of discharge.
M 1
0280    DTM
Date/time/period
A segment to specify date(s) and time(s) related to a location.
C 9
0290    SG8
DGS-FTX-MEA-SG9
A segment group to identify dangerous goods.
C 99
0300    DGS
Dangerous goods
A segment to specify dangerous goods.
M 1
0310    FTX
Free text
A segment to specify supplementary details regarding the dangerous goods such as the technical name of the dangerous goods etc.
C 9
0320    MEA
Measurements
A segment to specify measurements of the dangerous goods, such as: - net net weight.
C 9
0330    SG9
CTA-COM
A segment group to specify contact information including communication details regarding the dangerous goods.
C 9
0340    CTA
Contact information
A segment to identify a person or department to be contacted regarding the dangerous goods.
M 1
0350    COM
Communication contact
A segment to specify communication details of the contact specified in the CTA segment.
C 9
0360    SG10
TMP-RNG
A segment group to identify transport related temperature settings.
C 9
0370    TMP
Temperature
A segment to specify the type of transport related temperature such as storage, transport or operating temperature and also to optionally specify a single value temperature setting.
M 1
0380    RNG
Range details
A segment to optionally specify the transport related temperature such as a range of values.
C 1
0390    CNT
Control total
A segment to specify the number of containers in the message, explicitly given by the sender.
C 1
0400    UNT
Message trailer
A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.
M 1
 
  Generated by GEFEG.FX  
  http://www.gefeg.com