Directory   Messages   Segments   Composites   Data elements   Codes Meaning of the change indicators
  UN/EDIFACT  D.03A (Batch) Syntax version 3 Issue date 2003-06-23  
  Message type specification HANMOV
 
 
HANMOV 7 Cargo/goods handling and movement message  
——————————————————————————————————————————————
 
0010    UNH
Message header
A service segment starting and uniquely identifying a message. The message type code for the Cargo/goods handling and movement message is HANMOV.

Note:
Cargo/goods handling and movement messages conforming to this document must contain the following data in segment UNH, composite S009:

Data element  0065 HANMOV
              0052 D
              0054 03A
              0051 UN
M 1
0020    BGM
Beginning of message
A segment to indicate the beginning of the message by identifying the message by a document/message number.
M 1
0030    DTM
Date/time/period
A segment to indicate date(s), time(s) and periods relating to the whole message, e.g. document/message date.
C 9
0040    HAN
Handling instructions
A segment providing information on general handling instructions applicable to all data in the message, e.g. assembly and/or preparation of goods for shipment.
C 9
0050    FTX
Free text
A segment to specify free form or processable supplementary information. In computer-to-computer exchanges free form text will normally require the receiver to process this segment manually.
C 9
0060    CNT
Control total
A segment to specify control totals.
C 9
0070    CUX
Currencies
A segment to specify currencies and relevant details for the rate of exchange.
C 9
0080    SG1
TCC-LOC-FTX-CUX
A group of segments to specify charges associated with the handling.
C 9
0090    TCC
Charge/rate calculations
A segment to specify a charge.
M 1
0100    LOC
Place/location identification
A segment to indicate  locations where the chargeable action is (to be) performed.
C 9
0110    FTX
Free text
A segment to specify processable supplementary information associated with charge.
C 9
0120    CUX
Currencies
A segment to specify currencies associated with the charge.
C 9
0130    SG2
RFF-DTM-SG3-MOA
A group of segments containing related references and status information at this level.
C 9
0140    RFF
Reference
A segment to express a reference which applies to the HANMOV message.
M 1
0150    DTM
Date/time/period
A segment to indicate date and time relating to the reference.
C 9
0160    SG3
STS-DTM-FTX-HAN
A group of segments indicating the HANMOV order status and/or identifying an event and specifying relevant details.
C 1
0170    STS
Status
A segment specifying the status relating to an order for the logistics services.
M 1
0180    DTM
Date/time/period
A segment indicating the date and time of the status or event.
C 9
0190    FTX
Free text
A segment specifying non processable information relating to the status.
C 9
0200    HAN
Handling instructions
A segment giving information on general handling instructions applicable to order in the HANMOV message, e.g. assembly and/or preparation of goods for shipment.
C 9
0210    MOA
Monetary amount
A segment to specify a monetary amount associated with order, such as declared value, FOB value, etc.
C 9
0220    SG4
NAD-LOC-DOC-SG5-SG6
A group of segments to identify a party, related references, locations, contacts and required documents.
C 9
0230    NAD
Name and address
A segment to identify the party's name, address and function, e.g. warehouse/distribution centre.
M 1
0240    LOC
Place/location identification
A segment to indicate locations where a specific function will be performed.
C 9
0250    DOC
Document/message details
A segment to identify documents required of, by or for the party.
C 9
0260    SG5
RFF-DTM
A group of segments to specify references related to the party.
C 9
0270    RFF
Reference
A segment to identify a reference used by a party.
M 1
0280    DTM
Date/time/period
A segment to indicate date and time relating to the reference.
C 9
0290    SG6
CTA-COM
A group of segments identifying a contact and its communications related to the party.
C 1
0300    CTA
Contact information
A segment to identify a person or department within the party.
M 1
0310    COM
Communication contact
A segment to identify a communication number of a person or department to whom communication should be directed.
C 9
0320    SG7
TDT-SG8
A group of segments to indicate status details of the movement of goods such as mode and means of transport, locations, departure, and arrival date(s) and time(s).
C 9
0330    TDT
Transport information
A segment to indicate information related to a certain stage of the transport, such as mode, means and carrier.
M 1
0340    SG8
STS-LOC-DTM-SG9-SG10
A group of segments indicating the status of transport and/or identifying an event and specifying relevant details
C 1
0350    STS
Status
A segment specifying the status relating to a certain stage of transport (e.g. loaded).
M 1
0360    LOC
Place/location identification
A segment to indicate locations such as transport's origin, destination, stop-off, etc.
C 9
0370    DTM
Date/time/period
A segment indicating date and time of the status or event.
C 9
0380    SG9
RFF-DTM
A group of segments to specify a reference related to the status.
C 1
0390    RFF
Reference
A segment identifying a reference relating to the status (e.g. House Bill of Lading number).
M 1
0400    DTM
Date/time/period
A segment indicating date and time of the reference.
C 9
0410    SG10
DOC-DTM
A group of segments to specify a document and its associated date and time for a transport status.
C 1
0420    DOC
Document/message details
A segment to specify document details related to the status code, such as indication which document is missing (status code: document missing).
M 1
0430    DTM
Date/time/period
A segment to associate date and time with the prepared document.
C 9
0440    SG11
TOD-LOC
A group of segments indicating the terms of delivery for the whole HANMOV message
C 9
0450    TOD
Terms of delivery or transport
This segment is used to specify terms of delivery for the complete message
M 1
0460    LOC
Place/location identification
A segment identifying locations relevant to the terms of delivery e.g place of departure of border crossing point
C 9
0470    SG12
LIN-SG13
A group of segments providing details of the individually handled product items.
C 99
0480    LIN
Line item
A segment identifying the product item being handled or the resulting product code after assembly or disassembly.
M 1
0490    SG13
STS-PIA-IMD-HAN-TCC-SG14-MEA-QTY-GIN-GIR-SG16-FTX-SG17-LOC-SG18
A group of segments indicating the line item status and/or identifying an event and specifying line items details.
C 1
0500    STS
Status
A segment specifying the status relating to a line item.
M 1
0510    PIA
Additional product id
A segment providing additional product identification, e.g. EAN number.
C 9
0520    IMD
Item description
A segment to describe the product being handled. This segment should be used for products that cannot be identified by a product code or article number.
C 99
0530    HAN
Handling instructions
A segment to specify handling instructions specific to the product item in addition to and not overriding the handling instructions on message level.
C 9
0540    TCC
Charge/rate calculations
A segment to specify a charge associated with the product item, e.g. assembly charge.
C 9
0550    SG14
NAD-SG15
A group of segments for identifying names and addresses and their functions.
C 9
0560    NAD
Name and address
A segment to identify the party's name, address and function, e.g. seller, buyer, inspecting party. It is recommended that where possible only the coded form of the party identification should be specified, e.g. when the buyer and seller know each other.
M 1
0570    SG15
CTA-COM
A group of segments identifying a contact and its communications related to the party.
C 9
0580    CTA
Contact information
A segment to identify a person or department within a party.
M 1
0590    COM
Communication contact
A segment to identify a communication number of a person or department to whom communication should be directed.
C 9
0600    MEA
Measurements
A segment identifying physical measurements of the handled product item in original or unpacked form.
C 9
0610    QTY
Quantity
A segment to give quantity information concerning the product.
C 9
0620    GIN
Goods identity number
A segment providing identity numbers of the goods being handled, e.g. serial numbers for assembled products.
C 99
0630    GIR
Related identification numbers
A segment providing sets of related identification numbers for a product item, e.g. in case of assembly (disassembly) engine number, chassis number and transmission number for a vehicle.
C 99
0640    SG16
DTM-QTY
A group of segments indicating the status and/or identifying date/time information related to the product item and specifying quantity of items.
C 1
0650    DTM
Date/time/period
A segment providing date/time information related to the product item, e.g. production date.
M 1
0660    QTY
Quantity
A segment to give quantity information concerning the product.
C 9
0670    FTX
Free text
A segment to specify free form or processable information, which further clarifies, when required, the product item. In computer-to-computer exchanges free form text will normally require the receiver to process this segment manually.
C 9
0680    SG17
RFF-DTM
A group of segments to give reference numbers and dates.
C 1
0690    RFF
Reference
A segment identifying a reference related to the product item and/or a reference as a pointer to the goods item number in the GID group.
M 1
0700    DTM
Date/time/period
A segment to specify date/time/period relating to the reference.
C 9
0710    LOC
Place/location identification
A segment identifying a specific location, e.g. within the warehouse/distribution center.
C 9
0720    SG18
PAC-MEA-QTY-SG19
A group of segments providing details how the product item is packed, such as number and type of packages, physical measurements and quantities.
C 1
0730    PAC
Package
A segment to describe packaging details for the product item.
M 1
0740    MEA
Measurements
A segment specifying physical measurements of packages.
C 9
0750    QTY
Quantity
A segment to specify a quantity of products per package.
C 9
0760    SG19
PCI-GIN
A group of segments identifying one specific package or a number of packages, their marks and numbers.
C 9
0770    PCI
Package identification
A segment specifying marking and labels used on individual packages or a range of packages.
M 1
0780    GIN
Goods identity number
A segment providing identification numbers being applied to the packages handled.
C 9
0790    SG20
GID-HAN-CST-TMP-RNG-LOC-MOA-PIA-FTX-NAD-MEA-DIM-RFF-PCI-SG21-SGP-TCC-SG22
A group of segments to describe the goods items for which transport is undertaken.
C 9
0800    GID
Goods item details
A segment to identify a goods item for which handling is specified. A goods item can be identified at up to three levels of packaging.
M 1
0810    HAN
Handling instructions
A segment to specify handling instructions specific to the goods item in addition to and not overriding the handling instructions on message level.
C 9
0820    CST
Customs status of goods
A segment to specify goods in terms of customs identities.
C 9
0830    TMP
Temperature
A segment to specify temperature settings for a goods item.
C 9
0840    RNG
Range details
A segment to specify  temperature range settings for a goods item.
C 9
0850    LOC
Place/location identification
A segment identifying specific locations, e.g. within the warehouse/distribution center.
C 9
0860    MOA
Monetary amount
A segment to specify monetary amounts associated with a goods item, such as declared value, FOB value, etc.
C 9
0870    PIA
Additional product id
A segment to specify article numbers, e.g. in case of repackaging.
C 9
0880    FTX
Free text
A segment to specify processable supplementary information relating to the goods item, e.g. goods description.
C 9
0890    NAD
Name and address
A segment to specify an address of a place of collection or delivery or inspecting party for a goods item.
C 9
0900    MEA
Measurements
A segment to specify measurements, other than dimensions, applicable to a goods item.
C 9
0910    DIM
Dimensions
A segment to specify dimensions applicable to a goods item.
C 9
0920    RFF
Reference
A segment to identify references to a goods item.
C 9
0930    PCI
Package identification
A segment to specify marks and numbers of a goods item.
C 9
0940    SG21
DOC-DTM
A group of segments to specify documents and associated date(s) and time(s) for a goods item.
C 9
0950    DOC
Document/message details
A segment to specify a document prepared for a goods item.
M 1
0960    DTM
Date/time/period
A segment to associate date and time with the prepared document.
C 9
0970    SGP
Split goods placement
A segment to identify the equipment in which goods are loaded.
C 9
0980    TCC
Charge/rate calculations
A segment to specify charge associated with the goods item.
C 9
0990    SG22
DGS-FTX-MEA
A group of segments to specify dangerous goods details related to the goods item. One goods item may be in different dangerous goods classes.
C 9
1000    DGS
Dangerous goods
A segment to indicate the class of dangerous goods, packing group, etc.
M 1
1010    FTX
Free text
A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information.
C 9
1020    MEA
Measurements
A segment to specify measurements of that portion of the dangerous goods in the goods item.
C 9
1030    SG23
EQD-EQN-SEL-EQA-RFF
A group of segments to specify equipment in which goods are loaded.
C 9
1040    EQD
Equipment details
A segment to specify equipment and equipment size and type used in the transport.
M 1
1050    EQN
Number of units
A segment to identify the number of pieces of equipment.
C 9
1060    SEL
Seal number
A segment to identify seal and seal issuer associated with the equipment.
C 9
1070    EQA
Attached equipment
A segment to identify attached or related equipment such as chassis attached to a container.
C 99
1080    RFF
Reference
A segment to specify a reference number to equipment
C 9
1090    UNT
Message trailer
A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.
M 1
 
  Generated by GEFEG.FX  
  http://www.gefeg.com