Contents   Codes                        
  
  Service code list - Release 40005 - 2001/05/19    EDIFACT  Syntax Version 4  
  
 
 
  0085
Syntax error, coded
A code indicating the error detected.
 
 
  2
Syntax version or level not supported
Notification that the syntax version and/or level is not supported by the recipient.
  7
Interchange recipient not actual recipient
Notification that the Interchange recipient (S003) is different from the actual recipient.
  12
Invalid value
Notification that the value of a stand-alone data element, composite data element or component data element does not conform to the relevant specifications for the value.
  13
Missing
Notification that a mandatory (or otherwise required) service or user segment, data element, composite data element or component data element is missing.
  14
Value not supported in this position
Notification that the recipient does not support use of the specific value of an identified stand-alone data element, composite data element or component data element in the position where it is used. The value may be valid according to the relevant specifications and may be supported if it is used in another position.
  15
Not supported in this position
Notification that the recipient does not support use of the segment type, stand-alone data element type, composite data element type or component data element type in the identified position.
  16
Too many constituents
Notification that the identified segment contained to many data elements or that the identified composite data element contained too many component data elements.
  17
No agreement
No agreement exists that allows receipt of an interchange, group, message, or package with the value of the identified stand-alone data element, composite data element or component data element.
  18
Unspecified error
Notification that an error has been identified, but the nature of the error is not reported.
X 19
Invalid decimal notation
Notification that the character indicated as decimal notation in UNA is invalid, or the decimal notation used in a data element is not consistent with the one indicated in UNA.
Notes:
1. This code value will be removed effective with the first release of the service code list in 2003.
  20
Character invalid as service character
Notification that a character advised in UNA is invalid as service character.
  21
Invalid character(s)
Notification that one or more character(s) used in the interchange is not a valid character as defined by the syntax identifier indicated in UNB. The invalid character is part of the referenced-level, or followed immediately after the identified part of the interchange.
  22
Invalid service character(s)
Notification that the service character(s) used in the interchange is not a valid service character as advised in UNA or not one of the default service characters. If the code is used in UCS or UCD, the invalid character followed immediately after the identified part of the interchange.
  23
Unknown Interchange sender
Notification that the Interchange sender (S002) is unknown.
  24
Too old
Notification that the received interchange or group is older than a limit specified in an IA or determined by the recipient.
  25
Test indicator not supported
Notification that test processing can not be performed for the identified interchange, group, message, or package.
  26
Duplicate detected
Notification that a possible duplication of a previously received interchange, group, message, or package has been detected. The earlier transmission may have been rejected.
X 27
Security function not supported
Notification that a security function related to the referenced-level or data element is not supported.
Notes:
1. This code value will be removed effective with the first release of the service code list in 2003.
  28
References do not match
Notification that the control reference in UNB, UNG, UNH, UNO, USH or USD does not match the one in UNZ, UNE, UNT, UNP, UST or USU, respectively.
  29
Control count does not match number of instances received
Notification that the number of groups, messages, or segments does not match the number given in UNZ, UNE,  UNT or UST, or that the length of an object or of encrypted data is not equal to the length stated in the UNO, UNP, USD, or USU.
  30
Groups and messages/packages mixed
Notification that groups have been mixed with messages/packages outside of groups in the interchange.
X 31
More than one message type in group
Notification that different message types are contained in a functional group.
Notes:
1. This code value will be removed effective with the first release of the service code list in 2003.
  32
Lower level empty
Notification that the interchange does not contain any messages, packages, or groups, or a group does not contain any messages or packages.
  33
Invalid occurrence outside message, package, or group
Notification of an invalid segment or data element in the interchange, between messages or between packages or between groups. Rejection is reported at the level above.
X 34
Nesting indicator not allowed
Notification that explicit nesting has been used in a message where it shall not be used.
Notes:
1. This code value will be removed effective with the first release of the service code list in 2003.
  35
Too many data element or segment repetitions
Notification that a stand-alone data element, composite data element or segment is repeated too many times.
  36
Too many segment group repetitions
Notification that a segment group is repeated too many times.
  37
Invalid type of character(s)
Notification that one or more numeric characters are used in an alphabetic (component) data element or that one or more alphabetic characters are used in a numeric (component) data element.
X 38
Missing digit in front of decimal sign
Notification that a decimal sign is not preceded by one or more digits.
Notes:
1. This code value will be removed effective with the first release of the service code list in 2003.
  39
Data element too long
Notification that the length of the data element received exceeded the maximum length specified in the data element description.
  40
Data element too short
Notification that the length of the data element received is shorter than the minimum length specified in the data element description.
X 41
Permanent communication network error
Notification that a permanent error was reported by the communication network used for transfer of the interchange. Re-transmission of an identical interchange with the same parameters at network level will not succeed.
Notes:
1. This code value will be removed effective with the first release of the service code list in 2003.
X 42
Temporary communication network error
Notification that a temporary error was reported by the communication network used for transfer of the interchange. Re-transmissions of an identical interchange may succeed.
Notes:
1. This code value will be removed effective with the first release of the service code list in 2003.
X 43
Unknown interchange recipient
Notification that the interchange recipient is not known by a network provider.
Notes:
1. This code value will be removed effective with the first release of the service code list in 2003.
  45
Trailing separator
Notification of one of the following:
- the last character before the segment terminator is a data element separator or a component data element separator or a repeating data element separator, or
- the last character before a data element separator is a component data element separator or a repeating data element separator.
  46
Character set not supported
Notification that one or more characters used are not in the character set defined by the syntax identifier, or the character set identified by the escape sequence for the code extension technique is not supported by the recipient.
  47
Envelope functionality not supported
Notification that the envelope structure encountered is not supported by the recipient.
  48
Dependency condition violated
Notification that an error condition has occurred as the result of a dependency condition violation.
 
  Date  2001-05-19